INSTRUMENTS AND CONTROLS
||
The illustration is generic; the layout may vary depending
on the model or due to software updates
Changing the unit of measure
Change the units of measure for driven distance
and fuel consumption in the center display's Top
view.
Settings
1. Tap
in Top view.
2. Tap
System
Units.
Units of Measurement
3. Under
Metric
Imperial
US
,
or
Related information
•
Trip computer (p. 167)
•
Displaying trip computer information (p. 168)
170
Settings view
The center display's Settings view is used to
make many of the vehicle's function settings and
to display vehicle-related information.
Opening Settings view
Top view with the Settings button
1. Pull down the tab on the upper edge of the
center display to open Top view.
2. Tap
, select:
.
3. Tap one of the categories displayed and nav-
igate to sub-categories and settings by tap-
ping again.
4. Tap
Tap
Settings
.
Back
to go back in Settings view.
Close
to close Settings view.
Changing a setting
A sub-category in Settings view with various possible
settings
1. Tap the category/sub-category to navigate to
the desired setting.
2. Change the setting(s).
> The changes are saved immediately.