LOADING AND STORAGE
||
Retracting the cover
From the fully open position:
–
Lift the cover's handle and pull it rearward
slightly to release the attaching pins from
their grooves. Allow the cover to retract.
From the partially retracted position:
–
Grasp the handle and lift it slightly to release
the attaching pins from their grooves. Pull
the cover to the fully open position.
> Allow the cover to retract completely.
Removing the cover
1. With the cover retracted, press the button on
one of the cover's ends and lift out that end.
2. Carefully lift the cover up/out.
> The other end will release automatically.
Lift the cover out of the cargo compart-
ment.
Related information
•
Cargo net (p. 220)
•
Steel cargo grid* (p. 222)
•
Loading (p. 214)
•
Load anchoring eyelets (p. 216)
220
Cargo net
The cargo net helps protect passengers from
objects in the cargo compartment in the event of
a sudden stop or hard braking.
The cargo net is attached at four points.
The cargo net can be mounted in two positions:
•
Rear mounting: behind the rear seat back-
rests.
•
Front mounting: behind the front seats' back-
rests.
WARNING
•
Objects in the cargo compartment should
always be securely anchored.
•
All of the net's attachment points must be
securely in place when the net is used.
•
A damaged net must never be used.
Installing the net
Rear mounting
Rear mounting
1. Fold down the rear seat backrests to make
mounting the net easier.
2. Guide the ends of the net's cassette over the
load anchoring eyelets in the recesses in the
side panels. Press the cassette's ends into
place on each side. Check that the cassette
is securely in place.
3. Pull up the net.
4. Insert one of the net's upper attachments
into one of the rear ceiling brackets and
press it as far forward into the bracket as
possible.
5. Press the other attachment into the rear ceil-
ing bracket on the opposite side and press it
as far forward into the bracket as possible.
* Option/accessory.