Micro Sd Card - MAXTEK 74275 User Manual

Micro SD Card

Micro SD Card Requirements
• Micro SD Card 32GB or less
• Class 4 minimum. Class 6 maximum
Using a Micro SD Card
Insert the micro SD card in to the micro SD card slot on the body of
the camera. Push until it clicks into place.
Go through the menu settings and format the card.
Your card is now ready to record.
To remove the card press it in until it clicks, then let go and pull the
card out. Removing the SD card can cause the camera to turn off if
it is removed while the camera is on.
Accessing the Micro SD Card
There are 2 ways to access the micro SD card.
Through a card reader (not supplied) or via the mini USB port.
Connect the mini USB cable to the camera and the other end to a
desktop/laptop. Put the camera into mass storage mode.
Use the and buttons to navigate through the options and use
the 'REC' button to select Mass Storage.
25
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk