Setup; Turning The Camera On - MAXTEK 74275 User Manual

Setup

Turning the Camera On

After the camera has been fully charged and mounted correctly,
Connect the In-car adaptor to the accessory/cigarette port and the
other end to the camera. Press and hold the button on the side
marked until the 'Welcome' screen appears on the display.
Please Note:
The camera is designed to be powered by the in-car adaptor.
The internal battery is a short term back up of up to 30 minutes.
The camera will load up and show the HUD overlay and the live view.
If the camera is connected to the in-car adaptor it will automatically
turn on when the vehicle is turned on. Press the 'REC' button to
begin recording.
After Sales Support
UK/N.IRELAND HELPLINE N : 01270 508538
O
REP.IRELAND HELPLINE N : 1800 995 036
O
WEBSITE: www.quesh.co.uk
8
EMAIL: enquiries@quesh.co.uk