Toshiba TOSVERT VF-S15 Manual page 47

fd01 (Inverter operating status 1 (real time)) (VF-AS3)
6.5.13.
bit Function
0 Failure FL
1 Failure
2 Alarm
3 Under voltage (moff) Normal
4 V/f switching status
5 PID control off
6 Acc/Dec switching status AD mode 1
7 DC braking
8 Jog run
9 Forward / reverse run
10 Run/stop
11 Coast stop (ST = OFF)
12 Emergency stop
13 Standby ST=ON
14 Standby
HAND/AUTO
15
(LOC/REM)
0 1
No output Under in progress -
Not tripped Tripped
No alarm Alarm issued
Under voltage
V/f 1 V/f 2
PID control PID control
permitted prohibits
AD mode 2
Forced DC
OFF
braking
OFF Jog run
Forward run Reverse run
Stop Run
ST=ON ST=OFF
No emergency Emergency
stop status stop status
Start-up process Standby
Start-up process Standby
AUTO HAND
(REM) (LOC)
- 44 -
E6582051
Note
Trip status includes rtry and
the trip retention status are also
regarded as tripped statuses.
-
-
1: pt = setting value, vl,
V/f
vlv, vb, thra
2: pt = 0, f170, f171,
V/f
f172, f182
-
AD mode 1: acc, dec
AD mode 2: f500, f501
-
-
-
-
-
-
Standby: Initialization
completed, not failure stop
status, not alarm stop status
(moff, ll forced stop),
ST=ON, and RUN=ON
Standby: Initialization completed,
not failure stop status and not
alarm stop status (moff, ll
forced stop)
Enabled with f750="2"
HAND: Panel operation is enabled
AUTO: Operation method selected
cmod and fmod are enabled.
Enabled with f732="0"
LOC: Panel operation is enabled
REM: Operation method selected
cmod and fmod are enabled.