Wiring - Toshiba TOSVERT VF-S15 Manual

3.2. Wiring

This product is equipped with dual shielded RJ45 connectors. The shielding of RJ45 connectors are
connected to the grounding terminal of inverter.
When you use this product with VF-S15, please connect the grounding terminal of SBP009Z to grounding
terminal of inverter by attached grounding wire.
When you use this product with VF-AS3, you do not need the ground line wiring. Because when you attach
this product to VF-AS3, Shielded RJ45 connector is connected to the ground terminal of the inverter
Communication cable specifications
• CAT 5e or more
• Connector RJ45, non-crossover cable
• Shielded twisted pair cable
• Maximum cable length = 100 m (328 ft)
The following table describes the pin layout of RJ45 connecter.
* Fix a cable so that a communication connector may be not taken the weight of wire.
Connect the grounding terminal by grounding wire.
Port L and Port R
8..................1
- 16 -
Pin Signal
1 TD+
2 TD-
3 RD+
4 -
5 -
6 RD-
7 -
8 -
E6582051