Speaker Adjustment; Standby Switch / Overload Display; Control Panel - Adam Tensor Gamma Operation Manual

6. Speaker Adjustment

6.1

Standby switch / Overload display

The TENSOR Gamma features a standby button on the front panel. Please note that
due to the system, the OL (overload) display blinks when the loudspeaker is
being switched on. This does not indicate an overload.
If the OL display blinks during normal operation, this indicates an over-
load danger. To avert an overload and protect the loudspeaker, the
built-in security circuit will limit the maximum level of the amplifier.
6.2

Control panel

On the rear side you will find
controls that allow detailed fine-
tuning of your loudspeakers to
your particular room acoustics and
personal listening preferences.
The following tips are intended to
assist you at using the controls in
the best manner.
Please note that using the controls may have a great impact on the overall sound
characteristics of your loudspeakers. We recommend using the controls with ut-
most care and only after several audio tests with familiar recordings.
Tensor Gamma (Semi-active Version) Manual / english
11