Table of Contents
Advertisement
is in progress or while the [Device Settings] screen is
displayed.
• If the USB port to which a card reader is connected is
changed while the unit is turned on, the card reader will
not be recognized. In such cases, restart the unit.
If you selected [Bar Code Reader] or [Card Reader], be
sure to configure the [Reader Settings].
For details on this setting, see "To configure reader
settings" (page 64).
If you selected [Touch Panel / Mouse], be sure to
configure the [Touch Panel / Mouse Settings].
For details on this setting, see "Configuring Touch Panel /
Mouse Settings" (page 75).
To configure printer settings
When a UP-DR80MD is selected, configure the color
balance, brightness, and other settings.
1
Select [Advanced] for the USB port to which the UP-
DR80MD is connected, and press the ENTER button.
[Advanced] appears when one of [USB 3] to [USB 6]
is set to [UP-DR80MD].
The [Printer Settings] screen appears
2
Display the [Color Balance] tab, and adjust the color
balance for cyan, magenta, and yellow and red, green,
and blue.
You can specify a value between –32 to +32 for each
color.
3
Display the [Gray Balance] tab, and adjust the
balance for achromatic colors.
You can specify a value between –50 to +50 for the X
and Y values.
4
Display the [Bright] tab, and configure the
[Sharpness], [Dark], [Gamma], and [Light] settings
to adjust the brightness of printed images.
You can specify a value between –3 to +3 for
[Sharpness], and a value between –32 to +32 for
[Dark], [Gamma], and [Light].
5
Display the [Import] tab, and import a watermark file
or logo file.
[Import Watermark]
Import a watermark file.
Copy the watermark file onto a USB memory device,
and insert the device into a USB port on the unit.
For details on preparing a watermark file, see "To
prepare a watermark file" (page 63).
When you select [Import Watermark] and press the
ENTER button, a message requesting that you insert
media appears. Select [OK] and press the ENTER
button.
When import of the watermark file is complete, a
notification message will appear.
[Import Logo]
Import a logo file.
Copy the logo file onto a USB memory device, and
insert the device into a USB port on the unit.
For details on preparing a logo file, see "To prepare
a logo file" (page 64).
When you select [Import Logo] and press the ENTER
button, a message requesting that you insert media
appears. Select [OK] and press the ENTER button.
When import of the logo file is complete, a
notification message will appear.
6
When you finish configuration, select [Apply] and
press the ENTER button.
The configurations are saved, and the [Device 1] tab
appears again.
To prepare a watermark file
To print watermarks, prepare a watermark file that can be
imported to the unit and copy it onto a USB memory
device beforehand.
1
Prepare the watermark file.
The watermark file must meet the following
conditions.
• For A4 size paper
File format: 24-bit bitmap
File name: watermark_A4.bmp
Size: 2392 × 3400 pixels
Color:
Background: RGB (255, 255, 255) (white)
Watermark: RGB (0, 0, 0) (black)
• For letter size paper
File format: 24-bit bitmap
File name: watermark_85x11.bmp
Size: 2464 × 3192 pixels
Color:
Background: RGB (255, 255, 255) (white)
Watermark: RGB (0, 0, 0) (black)
63
Advertisement
Table of Contents
