Table of Contents
Advertisement
1
Press the 1 (on/standby) switch on the front panel of
the unit to enter standby mode.
The 1 (on/standby) indicator lights orange.
2
Set the main power switch on the rear panel of the
unit to the a (off) position.
The power is turned off.
Tip
To completely shut off the power supply, set the main
power switch to the a (off) position, and then disconnect
the power cord.
Configuring System
Settings
Be sure to configure the system settings before you begin
operating the unit. The system settings should be
configured by the system administrator.
For details on system settings, see "System Administrator
Settings" (page 56).
Tip
If the system administrator settings are not configured,
operations may not be performed as intended in some
cases.
30
Advertisement
Table of Contents
