Editing Test Strip Data - Accu-Chek INFORM II Operator's Manual

6 • Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter
Add Strip Lot 12:48
Strip Lot Confi rmation
D-530: Do you want to
use the suggested
values for strip 545603?
Use by: 02/10/13
L1(Lo): 2.4-4.1 mmol/L
L2(Hi): 16-21.6 mmol/L
11/19/12

Editing test strip data

Add Strip Lot 12:48
Strip Lot Confi rmation
D-530: Do you want to
use the suggested
values for strip 545603?
Use by: 02/10/13
L1(Lo): 2.4-4.1 mmol/L
L2(Hi): 16-21.6 mmol/L
Strip Expiration
11/19/12
11/30/12
1 2
4 5
7 8
0
11/19/12
70
Information about the expiration date and parameters for
pm
control solutions is subsequently displayed.
1 Touch
the meter without changes, or
2 Touch
before storing it in the meter.
As mentioned at the beginning of this chapter, you can
edit several parameters for test strips, the expiration date
and the value ranges for control solutions.
3 Use the keypad to enter the desired expiration date
pm
(use two digits and leading zero, if necessary). It is
not possible to enter a date beyond the expiration
date stored in the key.
4 Touch
tinue to the value ranges.
12:48
pm
3
6
9
to store the data for this lot number in
to modify the data for this lot number
to accept the modified date and con-