Editing Test Strip Data - Accu-Chek Inform II Operator's Manual

Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter

Editing test strip data

68
Information about the expiration date and parameters for
control solutions is subsequently displayed.
1 Touch to store the data for this test strip lot
number in the meter without changes, or
2 Touch to modify the data for this test strip lot
number before storing it in the meter.
As mentioned at the beginning of this chapter, you can
edit several parameters for test strips, the expiration date
and the value ranges for control solutions.
3 Use the keypad to enter the desired expiration date
(use two digits and leading zero, if necessary). It is
not possible to enter a date beyond the expiration
date stored in the key.
4 Touch to accept the modified date and
continue to the value ranges.