OSEE VAC6840N User Manual page 12

VAC6840N Video & Audio 2X1 Switcher
SW1
Function
Position
5 Mode auto select
6 Low level alarm
7 High level alarm
8 Reserve
Reserve
9
Reserve
A
Reserve
B
Reserve
C
Reserve
D
Reserve
E
F default
Note the following when setting parameters:
 Judge the validity of the input signal and the reference signal by checking the ERROR.
 To keep SW2 at the position of "UP" or "DOWN", the continuous adjustment can be
achieved.
 To return back to default status: rotate the SW1 to "0"; toggle the SW2 UP.
 When the video output signal changes, the audio output signal, which adapts to the video
output signal, will also change.
Specifications are subject to change without notice.
Options
(The position of toggling SW2:
SW2 is toggled down.)
 1：ENABLE
(SW2 is toggled up.)
 0：DISABLE
(SW2 is toggled down.)
 1：ENABLE
(SW2 is toggled up.)
 0：DISABLE
(SW2 is toggled down.)
 1：ENABLE
(SW2 is toggled up.)
 0：DISABLE
(SW2 is toggled down.)
 1：ENABLE
(SW2 is toggled up.)
Down/up: set all into default
Operating Manual
Default
—8—