Trycom Technology TRP-C28 User Manual page 14

13.1 Reset the module status
Command
Syntax
description
Response
EX: Send command:"$01RS".......Reset TRP-C28.
Response:"!01 "......... ..............Have been reset.
*Reset will clear all digital output status.
13.2 Read the module's name
Command
Syntax
description
Response
EX: Send command:$01M...Read the TRP-C28's name.
Response:"!01TRPC28"....... The module's name is "TRPC28".
$IDRS(CHK)(cr)
$
ID
RS
CHK
(cr)
!ID(CHK)(cr)
?ID(CHK) (cr)
$IDM(CHK)(cr)
$
ID
M
CHK
(cr)
!IDNNNNNN(CHK)(cr)
?ID(CHK)(cr)
First leading code
Address of setting module 00-FF(HEX)
Reset the TRP-C28 module
Checksum
Carriage return
Command valid
Command Invalid
First leading code
Address of setting module 00-FF(HEX)
Reading TRP-C28's name
Checksum
Carriage return
NNNNNN :The chars from 1 –6 chars
Command Invalid
14