Installation Instructions - X-Core Technology XCH17WM Service Manual

Auto Iris Function
DC DRIVE
▬
Pin 1 (Red) Drive
╂
Pin 2 (N.C) Drive
╂
Pin 3 (White) Damp
▬
Pin 4 (Black) Damp
Plug in auto iris connector
Screw the auto iris
lens on CS mount
④

Installation Instructions

HD Monitor
(1) Remove the cap from the lens mount.
(2) Select the C mount lens (with mount ring) or CS mount lens.
(3) Screw and fasten the lens into the lens mount.
(4) Connect the HD-SDI output to the HD monitor with 75ohm type
coaxial cable.
(5) Connect the power cord input.
(6) When monitor shows the picture, please adjust the focus and iris of the
lens to obtain the best image according to the following procedures:
‧ Choose objects at a distance about 5 ~ 10 meter away.
‧ Loosen the mount lens fixing screw (use hex screwdriver), if
necessary.
‧ Turn the lens and the mount together until image is clear.
‧ Screw the mount to camera.
(7) Fix camera to the bracket, if necessary.
⑤