Switch Definition; Menu Operation; Exposure Shutter - X-Core Technology XCH17WM Service Manual

Switch Definition

SET button
Press to display the menu. In the menu, this button functions as "ENTER".
UP & DOWN buttons
Press to select the item of menu.
LEFT & RIGHT buttons
Press to change the item value.
Size Dimension
Unit: mm
⑥
UP button
LEFT SET RIGHT
button button button
DOWN button

Menu Operation

‧ Press the SET button to display the menu on screen.
‧ Press the UP or DOWN button to select the item.
‧ Press the LEFT or RIGHT button to change mode.
‧ The ENTER symbol
means there is a sub-menu. Press the SET button to enter
to the sub-menu.
‧
Select the EXIT item and press the SET button to finish setting.
1. LENS
SETUP
2. EXPOSURE
1. LENS
3. WHITE BAL
2. EXPOSURE
4. DAY&NIGHT
3. WHITE BAL
4. DAY&NIGHT
5. NR
5. NR
6. SPECAIL 6. SPECIAL
7. ADJUST
7. ADJUST
8. RESET
9. EXIT
8. RESET
9. EXIT
1. LENS
To select the lens mode depending on the lens used:
‧ MANUAL When manual iris lens is used.
‧ DC
When auto iris lens that requires a DC drive signal is used.
Select MODE between INDOOR; OUTDOOR.
2. EXPOSURE
SHUTTER
To change the shutter setting and speed based on the environment.
‧ AUTO
After an immobile brightness value is set, the shutter speed
will adjust automatically to achieve the value.
‧ FLK
Select when flickering occurs on the screen due to an
Imbalance between illumination and frequency. Under this
mode, the shutter speed is NTSC: 1/100; PAL: 1/120.
‧ Fixed
Speed adjustable: 1/30; 1/60; 1/250; 1/500; 1/1000; 1/2000;
1/5000; 1/10000; 1/50000; X2; X4; X6; X8; X10; X15; X20;
X25; X30
AGC (Auto Gain Control)
Use this function to heighten the brightness signal automatically.
‧ HIGH
LOW; MIDDLE adjustable.
SPECIAL
MANUAL
CAM TITLE OFF
ATW
D-EFFECT
AUTO
MOTION OFF
PRIVACY OFF
LANGUAGE ENG
DEFECT
RS485
VERSION 120405
RETURN RET
⑦