Advertisement
INSTALLATION INSTRUCTIONS
(1) Connect the camera to a monitor with 75ohm type coaxial cable.
(2) Connect the power cord to DC 12V power supply.
(3) Fix camera to the ceiling or wall by mounting device.
ADJUSTING THE CAMERA ZOOM AND FOCUS
1. Loose the zoom ring screw.
2. Turn the zoom ring to the desired zoom condition.
3. Tight the zoom ring screw.
4. Loose the focus ring screw.
5. Turn the focus ring to focus.
6. Tight the focus ring screw.
7. Check the result with tools.
SPECIFICATIONS
Model Type
Image Pick-up Device
Effective Picture Elements
Horizontal Resolution
Minimum Illumination
S/N Ratio
Gamma Characteristic
Gain Control
White Balance
Lens Furnished
Auto Iris Control
Auto Electronic Shutter
Video Output
Power Supply
Operating Temp.
Water Resistance
IR-LED
IR Project Distance
Dimensions
XD445MR
SONY 1/3" CCD High Resolution
NTSC: 768*494, PAL: 752*582 (H*V)
520 TV lines
0 LUX @ IR
More than 48 dB
0.45
Automatically
ATW (2500°K ~ 9,500°K)
3.7-12mm / F1.4
DC-Drive Auto Iris lens
NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/110,000s
1 Vp-p Composite Video / 75 ohm BNC connector
DC 12V / 280 mA
-10°C to 50°C (14°F to 122°F)
IP66
11 units of high efficiency 850nm IR-LED
25 Meters
142mm (Φ) * 115.5mm (H)
Advertisement
