X-Core Technology XCH17WM Service Manual page 6

4. DAY&NIGHT
‧ AUTO
Automatically changes between color mode under bright light
environment and B/W mode under low light environment. Set
the value of DELAY: 0~100; D-N (AGC): Day to Night 0~100;
N-D (AGC): Night to Day 0~100; to define the changing
condition and time.
‧ COLOR
Common mode.
‧ B/W
Stay in B/W mode for clear and better visibility image under
low light environment. BURST: ON; OFF; IR SMART: ON (
LEVEL selectable; AREA adjustable); OFF; IR LED: ON; OFF;
IR PWM: Pulse-Width Modulation 0~100 adjustable.
‧ EXT
Control day & night mode by external device, if connected.
5. NR (Noise Reduction)
Enable this function to reduce the noise at low light environment. This function
enables the camera to use a higher AGC level to electronically enhance the
sensitivity of the camera in low light environment (higher AGC, more noise).
‧ 2DNR
ON; OFF
‧ 3DNR
ON (S-LEVEL and E-LEVEL adjustable); OFF
‧ LEVEL
0~100 adjustable.
‧ SMART NR ON; OFF
2DNR: OFF
6. SPECIAL
CAM TITLE (Camera Title)
‧ ON
To name the camera title.
‧ OFF
Not active.
D-EFFECT (Digital Effect)
‧ FREEZE
-- ON: Freeze the picture image.
-- OFF: To disable this function.
⑩
2DNR: ON
‧ MIRROR
For applications such as rear view camera, you can
rotate the image horizontally and vertically.
-- MIRROR: To see mirror image on monitor screen.
-- V-FLIP: To flip the image up side down.
-- ROTATE: To rotate the image.
-- OFF: To disable this function.
‧ D-ZOOM
P-Iris lens required for this function.
-- PIP: ON; OFF
-- D-ZOOM: X2.0~X64 adjustable
-- PAN&TILT
-- OFF: To disable this function.
‧ NEG. IMAGE
Negative Image
-- ON: To show negative image on monitor screen.
-- OFF: To disable this function.
MIRROR: OFF
MOTION (Motion Detection)
When the object on screen is moving, the camera will detect the changes.
‧ OFF
To disable this function.
‧ ON
-- SELECT: Select AREA1~AREA4.
-- DISPLAY: ON (Adjust the position and size of the
selected area); OFF
-- SENSITIVITY: 0~60 adjustable.
-- MOTION VIEW: ON (To display a warning on
PRIVACY (Privacy Zone)
Cover the areas you do not wish to appear on screen.
‧ ON
-- AREA1: Up to AREA7 selectable.
-- DISPLAY: ON (Adjust the position and size of the
selected area); OFF
-- COLOR: 0~16 selectable.
‧ OFF
To disable this function.
⑪
MIRROR
screen); OFF