Table of Contents
Advertisement
M2 Series
Auto Shut-Off
Enabling the Auto Shut-Off feature allows the manometer to turn
itself off after a user selected period of keypad inactivity.
Selectable options include DISABLED, 10 Minutes (which is the
factory shipped default), 20 Minutes, 30 Minutes, 45 Minutes and
60 Minutes. Disabling this feature limits the manometer to being
turned off by using the ON/OFF key only.
To configure auto shut-off follow these steps:
Keystroke
1. Follow steps 1-6 in the
User Info Select table.
2. Press the PRGM key,
then the up or down
arrow keys until the
desired shut-off time is
shown.
3. Press the PRGM key.
4. Press the left arrow key
twice.
www.meriam.com
page 11 of 31
Instruction Manual 9R000045-A
APR2007
Display
Top line reads "AUTO SHUT-
OFF" and bottom line reads
"ENTER TO SELECT".
Top line reads "AUTO SHUT-
OFF" and bottom line toggles to
"DISABLED", "10", "20", "30",
"45" and "60" minutes .
Desired Auto Shut-Off time is
selected, top line reads "AUTO
SHUT-OFF" and bottom line
reads "ENTER TO SELECT".
Returns to Measure Mode.
Advertisement
Table of Contents
Need help?
Do you have a question about the M2 Series and is the answer not in the manual?