Advertisement
Menu display
Function
D001
DMX address setting. This is changed using the Up or Down arrow buttons (1-512).
A1.XX
Auto mode 1 - fast colour changing / speed (00-99)
A2.XX
Auto mode 2 - gradual colour changing / speed (00-99)
Soud
Sound mode – Sound-to-Light operation
R000
Red dimming (000-255)
G000
Green dimming (000-255)
B000
Blue dimming (000-255)
F000
Strobing speed (000-255)
T.xxx
Unit temperature
DMX address setting - When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX
address. You can choose to set all units with the same DMX address or you can set every unit with its own DMX address. If all
units are set with the same DMX address all units will be synchronised and operate in the same way.
If you set each unit with a different DMX address, they will receive the DMX signal from their own DMX address. You will now be
able to control each unit individually. The DMX address that you set for each unit must be determined by the number of channels.
This unit has 6 DMX channels, therefore you should set the starting address of the first unit to 1, the second unit must then be set
to 7 (1+6), the third to 13 (7+6), the fourth to 19 (13+6), the fifth to 25 (19+6) and the sixth unit should be set to 31 (25+6).
DMX channel
CH1
Red dimmer
CH2
Green dimmer
CH3
Blue dimmer
CH4
Master dimmer
CH5
Strobe
CH6
Control mode
Master/Slave operation - Connect the units in a Master/Slave chain via 3 pin DMX cables:
1. Connect the DMX output of the Master unit to the DMX input of the first Slave unit.
2. Next connect another DMX cable from the first Slave unit DMX output to the second Slave unit DMX input.
3. Continue in this fashion until all units are connected.
4. Set the Master unit to one of the following modes: Auto 1, Auto 2 or Sound. Set all Slave units address to D001.
5. All Slave units will now follow the operation of the Master unit.
Product specification
Mains power / rated power
Control modes
Beam angle
Light source
Operating temperature
DMX512 connections
Dimensions (WxDxH)
Nett weight
Due to continuous product development, specifications and appearance are subject to change.
Value
Function
0-1
Off
2-255
Red dimmer 0-100%
0-1
Off
2-255
Green dimmer 0-100%
0-1
Off
2-255
Blue dimmer 0-100%
0-31
Off
32-255
Master dimmer 0-100%
0-9
Off
10-255
Strobe speed from slow to fast
0-31
DMX512 mode
32-63
Sound mode
64-159
Auto mode 1 from slow to fast
160-255
Auto mode 2 from slow to fast
AC100~240V, 50/60Hz / 35w
6 channel DMX512 / Auto / Sound-to-Light / Master/Slave
75°
132 x 0.2w high power red/green/blue tri-LEDs
-25°C to 40°C
3 pins XLR male/female
310 x 70 x 73.5mm (not including bracket)
1.2Kg
Advertisement
