Hardware Connections; Side Panel And Connections; Using The Reset Button - ZyXEL Communications ZYAIR B-2000 Quick Installation Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

Side Panel and Connections

CONNECTION
POWER
RESET
CONSOLE
WAN
LAN 1-4
F.G.

Using the RESET Button

Step 1. Use a pointed object to press the RESET button for 5-10 seconds (the SYS LED flashes), then
release it.
Step 2. If the SYS LED flashes within 30 seconds, the factory defaults have been restored and the
ZyAIR restarts. Otherwise, go to step 3.
Step 3.
Turn the ZyAIR off.
8
DESCRIPTION AND FUNCTION
This supplies the power to the unit. Connect the supplied power adaptor to the
wall outlet and insert the small plug from the power adaptor to this socket.
This button resets the unit.
This port is used for configuration and administration of the ZyAIR. Connect your
administration computer to this port via an RS-232 cable.
Connect your Cable/DSL modem to this port.
These auto-sensing LAN ports are used to connect the ZyAIR to local
computers or to an external hub. All LAN ports are auto-sensing. This means
that these ports automatically adjust according to the type of cable, for example,
Straight-through Ethernet cable or Crossover Ethernet cable.
Ground the ZyAIR by connecting a grounded wire to the Frame Ground (F.G)
terminal.
Warning!
Use only the supplied power adapter!

Hardware Connections