Configuring Dhcp - ZyXEL Communications ZYAIR B-2000 Quick Installation Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
The ZyAIR has built-in DHCP (Dynamic Hot Configuration Protocol) server capability, enabled by default.
This allows the ZyAIR to assign IP addresses, an IP default gateway and DNS servers to Windows that
support the DHCP client.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa.
If the Primary/Secondary DNS Server fields in DHCP Setup are not specified, for instance, left as
0.0.0.0, the ZyAIR tells the DHCP clients that it itself is the DNS server.
From the MAIN MENU screen, click on ADVANCED and then LAN to configure DHCP on the ZyAIR.
Make sure the IP pool starting address and the ZyAIR LAN IP address are on the
18

Configuring DHCP

Select this check
box to enable
DHCP server.
same subnet.
Enter the
beginning IP
address.
Enter the size of
IP address pool.
Enter the IP
addresses for the
DNS servers.
(Optional)
This is the default
ZyAIR LAN IP
address.