NexxTech 6319296 User Manual page 11

MAIN UNIT
• Press and hold for 2 seconds, set language of the day
of the week, year digit, month digit, date digit, hour
format (12/ 24 hours), hour digit and minute digit. (Note:
calendar format is default in month-date display.)
• When temperature mode has been selected, press
and hold for 2 seconds to toggle the temperature unit
between Celsius or Fahrenheit.
H. UP (▲) button
• Press to select the next available mode.
• Increase the parameters.
• In time with seconds display mode, press and hold for
2 seconds to activate/ deactivate radio controlled time
signal search manually.
• In time with weekday display mode, press and hold for
2 seconds to switch time zone from Pacific, Mountain,
Central to Eastern.
I. MEM/ HISTORY button
• When temperature mode has been selected, press
to recall the minimum or maximum temperature and
humidity readings of main and remote units.
• Press and hold for 2 seconds, stored memories will be
cleared.
• When pressure mode has been selected, press once to
check the historical pressure data for the past 24 hours.
J. WALL- MOUNT hole
• A recessed opening to mount the unit on a wall.
K. BATTERY COMPARTMENT
• Accommodates two (2) or AA 1.5V alkaline batteries (not
included).
L. TABLE STAND
11