Western Digital MY NET N600 D2F User Manual page 53

2. Click the Port Forwarding tab.
3. Enter the following for each port forwarding rule you create:
Setting
Enabled
IP Address
Application Name
External Port
Internal Port
Protocol
Computer Name
UDP (User Datagram
Protocol)
4. Click Save at the top or bottom of the page.
MY NET ROUTERS
USER MANUAL
NEED BETTER GRAPHIC
Description
Selecting the check box enables the port forwarding rule.
IP address of the device on your local network. This field can
be populated by selecting a Computer Name from the drop
down list.
From the drop-down list, select the application whose
information will pass through the specified port? Click the
double arrow button to the left to populate the name field.
Enter the port(s) you wish to forward from the WAN interface
(Internet). The port is automatically populated if you pick an
application from the drop-down list.
Enter the port(s) you wish to forward to on the LAN client. The
port is automatically populated if you pick an application from
the drop-down list.
Select the protocol which you wish to port forward. The
options are All, TCP or UDP. The protocol is automatically
selected if you pick an application from the drop-down list.
From the drop-down list, select the computer that will receive
the information? Click the double arrows to the left to populate
the IP address field.
Protocol for transmitting data over a network. When data is
sent, the recipient does not acknowledge receiving it.
PERFORMING ADVANCED TASKS
48