Western Digital MY NET N600 D2F User Manual page 23

To configure basic wireless settings:
Set Up Wireless
1. Click the
displays.
2. View or modify the required wireless settings for the Wireless 2.4 GHz and Wireless
5 GHz bands:
Note: You can change some settings on this screen. See "Advanced Wireless
Settings" on page 27 for additional wireless settings.
Setting
ON/OFF
Network Name
(SSID)
Security Mode
Network Key
Channel Width
Channel
MY NET ROUTERS
USER MANUAL
icon at the top of the page. The Set Up Wireless screen
Description
Wireless service is enabled by default. To disable, toggle to the
OFF setting.
Name given to the wireless band.
Type of security being applied to the wireless band. The default
is WPA/WPA2.
WPA (Wi-Fi Protected Access) and WPA2 are security protocols
that use a dynamically changing key. WPA2 is the second
generation protocol that uses stronger AES (Advanced
Encryption Standard) encryption. The third option is None.
Password for accessing the wireless band.
The default setting is 20/40 MHz (Auto), which is recommended
unless you are having connectivity issues. The other option is
20 MHz.
Accept the default (Auto) or select a channel from the drop-
down list.
BASIC SETTINGS AND TASKS
18