Western Digital MY NET N600 D2F User Manual page 44

Setting
Firmware Upgrade from a
File:
Select a File to Upgrade
Save Settings to a File
Restore Settings from a File To restore settings from a file, click Choose File and select it.
Reset to Factory Default
Settings
Reboot the router
Ping Test
Host Name or IP Address
Ping Result
First Name, Last Name,
Email Address
Save Log File to Local Hard
Drive:
Log Level
Log Type
Log Table:
Select Language
Mode
MY NET ROUTERS
USER MANUAL
Description
Click Choose a File and browse to the latest firmware file.
If you locate firmware that is more recent than your current
firmware, select the file and save it. Click Upload to upgrade
the router firmware.
Click Save Configuration. The router's current configuration is
downloaded to your computer.
Click Restore Configuration.
To reset the router to its original settings, click Reset.
Click Reboot.
Enter the host name or IP address of a computer you want to
locate on the network and click Ping.
If the computer is in the network, the router will locate it.
Enter your first and last name and email address to register
your router.
After generating a log file, click Save.
From the drop-down list, select the alert level of the log you
want to generate.
From the drop-down list, select the type of log you want to
generate.
Click the tabs to reveal the log pages you want to view or to
clear or refresh the table.
From the drop-down list, select the language of the UI and
report text.
From the drop-down list, select whether the router should be in
Router Mode or Extender Mode. When this device is set to
Extender Mode, it adds/extends wireless capability to your
existing network.
ADVANCED SETTINGS
39