P L Aya B L E F O R M At S; C O N N E C T I N G To A - Gemini MDJ-500 User Manual

C L E A N I N G T H E
U N I T
To clean the MDJ-500, use only a dry soft cloth and/or
compressed air. If the unit is soiled with stubborn dirt, we
suggest using a 2:1 solution of distilled water and 30%
isopropyl alcohol. Avoid using harsh cleaning chemicals such
as benzene, paint thinner, bleach, or hydrochloric acid, which
will damage the unit.
O P E R AT I N G
C O N D I T I O N S
For optimum performance, the temperature of the operating
environment should be between +5º C to +35º C (+41º F - +95º F).
Failure to maintain proper operating temperature may result in
difficulty reading the display, thermal overload, or systemwide
instability. Avoid exposing the unit to direct sunlight.
When placing the unit in an installation, make sure that it is
placed on a stable surface, as far away from vibrations as
possible. Even though the unit is impervious to vibration, the
storage devices (specifically hard drive based ones) that are
designed to be used in conjunction with it are typically not.
Also be sure not to place or use the player on heat generating
sources, such as amplifiers or near spotlights.

P L AYA B L E F O R M AT S

The MDJ-500 plays music files on USB storage devices. All
of the following file formats are supported:
• WAV (16-bit PCM, sample rates of 8 kHz, 11.025 kHz, 12
kHz, 16 kHz, 22.50 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz)
• MP3 (16 bit, 44.1 kHz, MPEG-I, Layer III)
• AAC (16 bit, 44.1 kHz, stereo, AAC Core, AAC Plus, AAC
Plus v2)
• AIFF (16 bit, 44.1 kHz, stereo)
Supported file systems on USB Storage Devices include:
• FAT
• FAT32
• HFS+
• NTFS
4
i n t r o d u c t i o n
U S I N G M I D I
C O N T R O L A N D AU D I O
When placed in MIDI mode, the MDJ-500 can send MIDI data
from the buttons and dials to a computer to control the parameters
and playback controls of DJ software. The audio playback from
the computer can also be output from the MDJ-500.
Before using the MDJ-500 as an audio device, connect the
MDJ-500 with a USB cable and allow your PC/MAC to detect
it. Open your DJ software and select the MDJ-500's output
device in the DJ software's settings. For instructions on how to
do this, see your DJ software's operating instructions.

C O N N E C T I N G TO A

C O M P U T E R
The MDJ-500 is a plug and play device that requires no
software installation. The MDJ-500's audio and MIDI drivers are
compatible with PC and MAC.
• To use the MDJ-500 with a computer using Windows, connect
the MDJ-500 to your PC after starting up the computer. The
MDJ-500 will configure standard WDM drivers.
Select the MDJ-500 as your device to use it as your audio
device. ASIO drivers can also be configured for use with
the MDJ-500 and are available at geminisound.com
• To use the MDJ-500 with a computer using the OSX operating
system, connect the MDJ-500 to your MAC after starting up the
computer. Use the system's standard Core Audio drivers and
select the MDJ-500 as the device.
m d j -
5 0 0
m a n u a l g e m i n i s o u n d . c o m
•