Se Tt Ings Prefer En C Es - Gemini MDJ-500 User Manual

S E T T I N G S
1 - Press the SETTINGS button (27) to see the settings screen.
2 - Use the browse knob (8) to select the settings item.
3 - Set the cursor to the item you want to change, then press the browse knob.
4 - Turn the browse knob to highlight the setting you want.
5 - Press the browse knob to enter the setting. Press the back button to abort the change.
6 - Press back to exit the settings menu.

SE TT INGS PREFER EN C ES

(Default in bold)
Options Settings
Current Song BPM
AutoCue
AutoCue Level
Eject / Load
Time Format
Pitch / Tempo Range
Keylock
BPM Mode
BPM Lock
Beat Grid
Quantize
Beat Offset
Emergency Loop
Sound Card
MIDI Channel
Vinyl Mode
Platter Nudge
Load Settings from MSD
Save Settings to MSD
Reset Settings
Software Version
Exit
Settings are stored and loaded from the USB storage device when one is connected. To manually set or recall your settings, use the
"Load Settings from MSD" or "Save Settings to MSD" features from your settings page in the MDJ-500. The Gemini VCase software can
also create and set settings data. This allows you to configure one device the way you want it, then export those settings to your other
MDJ devices.
m d j - m a n u a l g e m i n i s o u n d . c o m
5 0 0 •
Settings Range
Normal, *2, /2
On, Off
-36dB, -42dB, -48dB, -54dB, -60dB, -66dB, -72dB Sets Autocue detection level
Lock, Unlock
Elapsed, Remain
4%, 8%, 16%, 24%, 50%, 100%
On, Off
Auto, Tap, ID3, Man
Value, Off
On, Off
On, Off
On, Off
On, Off
44/16, 48/16, 48/24, 98/24
0-15
On, Off
1, 2, 3, 4, 5
Description
Allows user to correct double or half BPM analysis
errors
Sets the master cue point at the first audible level
Lock media when playing
Show elapsed or remaining time
Sets pitch/tempo range
Turns on Keylock
Selects BPM mode
Sets BPM Lock on or off
Shows beat grid on waveform
Turns Quantize on or off
Allows manual adjustment of beat grid
Creates 4 beat loop when usb stick is removed
Sets sound card setting
Sets MIDI Channel
Turns Vinyl (scratch) mode on or off
Determines platter nudge sensitivity
Loads stored settings off mass storage device
Save setings to mass storage device
Reset settings to default values
Current software version
Exit the menu
13