Program Radio Stations Manually; Select A Preset Radio Station; Other Features; Set The Alarm Timer - Philips DC190B User Manual

Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press TIME SET/AUTO SCAN to activate
the program mode.
The preset number begins to blink.
»
3
Press PRESET +/- to select a number.
4
Press TIME SET/AUTO SCAN to
confi rm.
5
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
Press PRESET +/- to select a preset
number.

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock
correctly.
2
Press and hold ALARM 1 or ALARM 2
for 2 seconds.
or
»
blink.
3
Press TUNING +/- repeatedly to set the
hour.
4
Press ALARM 1 or ALARM 2 to confi rm.
or
»
to blink.
EN
12
and hour digits begin to
and minute digits begin
5
Repeat steps 3-4 to set the minute.
6
Repeat steps 3-4 to select whether to
ring alarm on weekdays or at weekend.
"L XX(volume level)" begins to blink.
»
7
Repeat steps 3-4 to set the maximum
alarm volume.
Set alarm mode
1
Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
When the alarm time comes, the
»
selected iPod, radio or buzzer turns on.
Tip
•
If iPod source is selected but no iPod is loaded,
the buzzer is selected automatically.
Activate and deactivate the alarm
timer
1
Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
If the timer is activated,
»
displayed.
• To deactivate the alarm timer, press
ALARM 1 or ALARM 2 repeatedly
until is displayed.
If the timer is deactivated,
»
disappears.
Repeat alarm
1
When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL .
The alarm repeats ringing minutes later.
»
Tip
• TUNING+/- to adjust interval
You can press
to repeat alarm.
or is
or