Safety 6 Specifi Cations; Set The Sleep Timer; Adjust Display Brightness; Product Information - Philips Dc190B User Manual

Stop alarm ring
1
When the alarm rings, press the
corresponding ALARM 1 or ALARM 2 .
The alarm stops but the alarm settings
»
remain.
View the alarm settings
1
Press ALARM 1 or ALARM 2 .

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the
»
display shows
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When the sleep timer is deactivated,
»
disappears on the display.
Note
•
When the sleep timer is activated, the volume
will gradually decrease.

Adjust display brightness

1
Press BRIGHTNESS CONTROL
repeatedly to select different levels of
display brightness.
.
7 Product
information
Note
•
Product information is subject to change
without prior notice.
Specifi cations
Amplifi er
Rated Output Power 2X1.5 W RMS
Signal to Noise Ratio >55 dB
MP3 Link
Tuner
FM
Tuning Range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion <3%
Signal to Noise Ratio
0.6 V RMS 10 kohm
87.5 - 108 MHz
50 KHz
<22 dBu
<45 dBu
<28 dBu
>45 dB
EN 13