Table of Contents
Advertisement
Advanced Wireless Settings
You can configure advanced settings for your wireless network. You can also set up a
schedule to turn off your wireless network, configure the WPS settings, and set up an access
list for wireless clients.
Use caution when changing these settings.
To change advanced settings for your wireless network:
1.
Log in to the WiFi bridge/extender.
For more information, see
2.
Select Advanced > Wireless Settings.
You configure the 2.4 GHz and 5 GHz WiFi bands separately.
3.
To completely turn off the wireless radio of the WiFi bridge/extender, clear the Enable
Wireless Router Radio check box.
When the wireless radio is disabled, you can still use the WiFi bridge/extender by
connecting computers to the WiFi bridge/extender with an Ethernet cable. By default, the
wireless radio is enabled.
MoCA 2.0 N600 WiFi Bridge/Extender WM2500RP
Use NETGEAR genie after Installation
Advanced Settings
42
on page 16.
Advertisement
Table of Contents
