Configure Sim Pin; Troubleshooting - Zte Velocity USB Stick User Manual

Configure SIM PIN

If the SIM PIN feature is enabled for the nano-SIM card in your
device, you will need to enter the PIN when you log in for the
first time. To change the SIM PIN status, you need to disconnect
from the network first (see Disconnect From the Network on
page 7 for details).
Note: The nano-SIM card will be locked if you enter the wrong PIN
three times consecutively.
Enable or Disable the SIM PIN
1. From the management web site, click Settings.
2. Click Advanced SIM PIN.
3. Click Enable or Disable next to PIN Status.
4. Enter the SIM PIN and click Apply.
Change the SIM PIN
Note: You must enable the SIM PIN before you can change the PIN.
1. From the management web site, click Settings.
2. Click Advanced SIM PIN.
3. Click Change PIN.
4. Enter the current PIN and the new PIN; click Apply.
20

Troubleshooting

Advanced Settings Troubleshooting
Problem Solution
Wait until the device has connected to
the network (indicator light is solid green,
not blinking).
Cannot access
the Internet Move to a location with a stronger signal.
Make sure the device contains a
nano-SIM card.
Contact your service provider.
Wait until the device has connected to
the network (indicator light is solid green,
not blinking).
Cannot access
Make sure you have entered the
the management
correct address: http://attusbmodem
web site
or http://192.168.1.1 .
Only use one network adapter in your
computer.
If you are using a computer running Mac
OS X, install the device driver. (See Install
Connection is slow
the Driver (Mac OS X) on page 6.)
Move to a location with a stronger signal.
21