Auxiliary Connection; Connecting An External Device; Environmental Information - Philips AZ1330 User Manual

DOCK
Playing iPod using
AZ1330D
By connecting the iPod to your AZ1330D,
you can listen to the sound of the docked
player through the powerful speakers of the
Hi-Fi system.
Compatible portable player
• Most Apple iPod models with 30-pin dock
connector as follows:
20GB, 40GB, 20/30GB photo, 40/60GB
photo, 30GB video, 60/80GB video, mini and
nano.
Dock adaptor
Before plugging your player in the dock, snap
the suitable dock adaptor into the dock to
provide a snug fit for the player to be docked.
Selecting the correct dock adaptor
• For the iPod dock, 8 dock adaptors of
different type, as indicated at the back of the
adaptor, are included to fit the following iPod:
20GB, 40GB, 20/30GB photo, 40/60GB
photo, 30GB video, 60GB video, miniand nano.
Playing Apple iPod using AZ1330D
1 Snap the compatible iPod into the dock
connector.
• AZ1330D will auto switch to DOCK source
(See 7).
2 For iPod, the connected player will play
automatically.

Environmental information

All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.

Auxiliary connection

Notes:
By using the buttons ( 2; ¡1 2 ™ and
–
VOLUME ) on the AZ1330D and its remote
control, the following disc playback features are
available: Play/Pause, selecting next/previous track,
fast forwarding/rewinding and changing volume.
The buttons ( 2; ¡1 2 ™ and VOLUME ) on
–
the AZ1330D and its remote control can work
only with playback of the audio contents stored
on the docked player
Charging iPod battery using the dock
In the power-on and standby mode of
AZ1330D, you can charge the iPod when
docking.
Helpful hints:
– In DOCK and CD mode, if AZ1330D is in the
STOP position for 15 minutes, it will auto switch
to standby.

Connecting an external device

You can listen to the sound of the connected
external device through your AZ1330D's
speakers.
1 Press repeatedly SOURCE (or AUX on the
remote contorl) to select AUX mode.
2 Use a line-in cable (not supplied) to connect
AZ1330D's AUX jack (3.5 mm, located on
the top panel) to an AUDIO OUT or
headphone jack on an external equipment
(such as CD player, or VCR)