Kärcher HWE 4000 Original Instructions Manual page 42

List of nozzles
Spray jet
Order No.
Description (spray angle 25°)
Minimum water quantity
Pressure
Equivalent diameter
Recoil force
Kärcher-Innenreiniger
Water flow-rate l/h
Pressure MPa
Number of nozzles --
Nozzle size --
Order No. --
Attachment sets
Pump module HD 4000 E
HWE 4000 can be operated with each pump module that has the
corresponding technical data.
This is 100% assured when you use the Kärcher pump module
HD 4000 E.
It can be equipped with the following attachments:
Pressure release for star/ delta startup
–
Automatic mechanism for quantity regulation for spray jet op-
–
erations
Swimmer tank for mains separation
–
Pressure switch for hydraulic switching
–
Detergent dosing for suction-side addition
–
Steam stage attachment set
Order No. 2.638-342
Set of components for safely operating the HWE 4000 as steam
generator (below 140 °C).
Half-load attachment set for steam stage
Order No. 2.638-343
Special set of components for the pump module HD 4000 E to-
gether with the attachment set Steam stage for HWE 4000.
Attachment set for spray jet operations
Order No. 2.638-341
Attachment set for safely operating the HWE 4000 in spray jet
mode (reduced flow quantity below 3000 l/h with burner stage 1).
42
6.415-681
2512 EG
l/h 1450
MPa 10
mm 2,16
N 60
3000 3900 3900 6000
80 50 80 50
2 2 2 2
2,5 3,1 2,9 3,8
5.765- 4.765- 5.765- 4.765-
018 030 025 008
17
-
EN