Sony DVP-NS999ES Service Manual page 12

Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
D
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital, or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using D-2 . With the following connections, you can enjoy a more
realistic audio presence in the comfort of your own home.
CD/DVD player
DIGITAL OUT S-LINK AUDIO OUT 5.1CH OUTPUT
1 2 FRONT REAR CENTER
PCM/ DTS/ CONTROL S L
DOLBY DIGITAL IN
L
COAXIAL OPTICAL
COMMAND MODE
1 2 3
R
WOOFER
R
2 2 Y P P
B R SELECTABLE
INTERLACE
PROGRESSIVE
1 1
VIDEO S VIDEO SCAN SELECT
OUT OUT
COMPONENT VIDEO OUT
to DIGITAL OUT
D-2
(COAXIAL or OPTICAL)
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Stereo audio cord
(not supplied)
or or
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
Subwoofer
Center
l: Signal flow
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
./>
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 76).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
D-1 .
D-1
to 5.1CH
OUTPUT
5.1CH OUTPUT
FRONT REAR CENTER
L
R
WOOFER
Monaural audio cord
(not supplied)
to audio input
[Speakers]
Front (L) Front (R)
Rear (R)
Rear (L)
,continued 29
[/1
X/x
ENTER
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
FRENCH
AUDIO:
SUBTITLE: SPANISH
PORTUGUESE
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
31
,continued
: Connecting to the 5.1ch input jacks
D-1
You can enjoy 5.1ch surround sound using
the internal Dolby Digital, DTS, or Super
Audio CD Multi decoder of this player.
: Connecting to a digital jack
D-2
This connection will allow you to use the
Dolby Digital, or DTS decoder function of
your AV amplifier (receiver). You are not
able to enjoy the surround sound effects of
this player.
z Hints
• For connection D-2
For correct speaker placement, refer to the
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection D-2
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 31).
• When you connect an amplifier (receiver) that
conforms to the 96kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 82).
• Super Audio CD audio signals are not output from
the digital jack.
30
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
4:3 LETTER BOX
TV TYPE:
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND: 4:3 PAN SCAN
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
COMPONENT OUT:
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 77)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 77)
8
Press ENTER.
The Setup Display for selecting the type
of video signal appears.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
BLACK LEVEL :
BLACK LEVEL
(COMPONENT OUT)
COMPONENT OUT:
4:3 OUTPUT:
PROGRESSIVE
9
Press X/x to select the type of
signals you wish to output to your
TV.
Select "PROGRESSIVE" only if you
have made video pattern C (page 21) and
wish to view progressive video signals.
◆ Interlace format TV (standard TV)
• INTERLACE (pages 78)
◆ Progressive format TV
• PROGRESSIVE (pages 78)
32
1-7
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
16:9
YES
: ON
AUDIO OUTPUT L/R
INTERLACE
DIGITAL OUTPUT
FULL
DIGITAL & 5.1CH OUTPUT
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 26 to
29 ( through D
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "AUDIO OUTPUT L/R." Quick
Setup is finished and connections are
complete.
ON
B-2 C-2 D-2
ON
• Select "DIGITAL OUTPUT." The Setup
: ON
INTERLACE Display for "DOLBY DIGITAL" appears.
INTERLACE
or both and
D-1 D-1
• Select "DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
DIGITAL" appears.
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 27 to
29 ( B through D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM: DOLBY DIGITAL
).
D-2
).
OFF
STANDARD
SHARP
ON
D-PCM
D-PCM