Technical Specifications; Response Curve; Block Diagram - Montarbo MT200A Instruction Manual

MT200A
processor controlled active speaker system
Specifications
Speaker system
2-way bass reflex
• Components: custom designed
- bass frequencies 8" high efficiency woofer
Nominal diameter 8"
Nominal impedance 8 ohms
Power capacity 200 Watts
Net weight 3,4 Kg
Thiele & Small Parameters
fs 80Hz
Re 5,8 ohms
Qms 2,51
Qes 0,35
Qts 0,31
Vas 11,16 dm
B.l 13,75T/m
SD 213,82 cm
Mms 22,3 gr
- high frequencies 1" compression driver loaded by a
90° x 60° horn
Throat diameter: 1"
Nominal impedance: 8 ohms
DC resistance: 5,5 ohms
Power capacity: 125 Watts
Crossover: 1800 Hz; 12 dB/oct
Voice coil diameter: 25 mm
Overall diameter: 90 mm
Depth: 53 mm
Net weight: 800 gr
• Impedance 8 ohms
• Frequency response 58Hz ÷ 20kHz
- bass: 58Hz ÷ 1800Hz
- mid/high: 1800Hz ÷ 20kHz
• Sensitivity (1W / 1m) 98 dB
• Max SPL 121 dB
Built-in power amplifier MosFet (class AB) processor controlled
• Max. output power 150 Watts continuous
220 Watts peak
• Frequency response 10Hz ÷ 40kHz ±1dB
• Input impedance line: 10 kOhms - micro: 2 kOhms
• Input sensitivity line: -10dB - micro: -40dB
• Noise referred to input -110dB (A weighted)
• Power supply 230 V.A.C. 50÷60Hz - Fuse: T 1AL
on request: 117 V.A.C. 50÷60Hz, fuse T 2A
Connections Combined XLR and 1/4" jack (Neutrik
Combo
1/4" jacks for the line inputs and for
the mixed output
Construction
Injection moulded polypropylene
cabinet. Steel protection grille.
Stand adaptor. Threaded inserts (8M)
Dimensions (w x h x d): 25 x 42,5 x 23 cm
Weight: 10 Kg

Block diagram

16
APPENDIX
3
2
) for the micro input;
®

Response curve