Table of Contents
Advertisement
Step 3
Reconfirming the option set after completing
Example : 014A25-1700b7
Press the
button for the "
Press the
button for the " " mode and the display will be shown as
Step 4
Pressing the
When pressing the
it sounds beep or ringing and the first LED lamp on the left side is flickering at the
same time, then the input option is completed. If it doesn't sound ringing, try again by
pressing the
(On/Off)button.
Step 5
Testing the unit
1 Remove the battery from the remote control.
2. Insert the battery into the remote control.
3. Press the
N N
o o
t t
e e
Error mode
N N
o o
t t
e e
1. If all lamps of the indoor units are flickering, plug out and in again and press the
(On/Off) button again.
2. If the unit doesn't work properly or all lamps are continuously flickering after setting the option
code, check that the option code is set properly for its own model.
7) If the first number is , it is correct. Otherwise, press the
until
appears.
8) When pressing the
9) When pressing the
10) When pressing the
11) When pressing the
12) When pressing the
" mode and the display will be shown as
(On/Off) button
(On/Off)button in the direction of the remote control for unit,
(On/Off)button in the direction of the remote control for set.
button
~
on the display, select one of them.
button
~
on the display, select one of them.
button
~
on the display, select one of them.
button
~
on the display, select one of them.
button
~
on the display, select one of them.
button
.
.
11
Hide quick links:
Advertisement
Table of Contents
