Nikon COOLPIX S1 Repair Manual page 76

LCD and others
Monitor LCD
White/black spots on
Downloaded from www.Manualslib.com
Item
・ No troubles with reproduction of W, B and RGB.
appearance, etc ・ The monitor LCD complies with the SY monitor LCD perfor-
mance standards.
・ No vignetting in the LCD display range.
・ Slant of image and the monitor frame: ± 0.75° or less.
・ Difference between right/left and up/down of the black belt width
at periphery of the image: within 0.3mm.
(Make a check viewed from the front of LCD.)
(Change to each mode and check all the segments of LCD.)
・ Difference between right/left and up/down: Difference between
"a" and "b"
Viewfinder frame ・ Through-the-monitor image: 96 to 100%
coverage ・ Play-back image:
・ Reproduce each single color of R, G, B and white, and make a
LCD visual check.
1
Zone A
Zone
B: Valid display range
A: Area of 4/16 when measured from the center of B
・ Defect in lines: No defect in lines.
・ Defect in pixels: Defects are the following figures or less.
Zone
A
B
Total
・ White dot: Recognizable pixels through 5% ND filter
・ Black dot: Dark-appearing pixels
manuals search engine
Criteria
a
96 to 100%
2 1
1
2
B 1
White dots Black dots
1
3
4
- R9･ S1 -
VAA35001-R.3666.A
Visual check
b
Visual check
Visual check
6
6
Tools