Nikon COOLPIX S1 Repair Manual page 24

ASSEMBLY OF BATTERY HOLDER
・ Adhere the label [#236] on the battery holder.
・ Pass the shaft [#233] through the battery holder [#238], the inner cover [#231] and the spring [#232]. Then, insert the
end of the spring [#232] into the holes of the inner cover [#231] and the battery holder [#238]. (Fig. 1)
・ Set the battery cover [#230] onto the inner cover [#231].
・ Set the spring [#234].
・ Set the battery lock lever [#235].
・ Set the spring [#237].
Downloaded from www.Manualslib.com
Spring [#237]
Label [#236]
Battery lock lever [#235]
Grease: MZ800S
Spring [#232]
Inner cover [#231]
manuals search engine
Battery holder [#238]
Spring [#234]
Spring [#232]
Inner cover [#231]
Battery cover [#230]
Battery holder [#238]
Insert the end of the spring [#232] into
each hole.
（Fig.1）
- A6･ S1 -
VAA35001-R.3666.A
Shaft [#233]