Managing The Print Queue - AGFA Drystar 5302 User Manual

Managing the print queue

You can always check the status of the print jobs.
Keep in mind that one print job can hold several films to be printed. In accordance
with the acquisition modality used and with the actual settings, films can be
grouped in a folder to be submitted as one print job for the Drystar 5302. Refer to
the User manual of the acquisition modality for more information.
Checking the print queue
If jobs have been transmitted from the network to the Drystar 5302, they are
put in the print queue on a first in, first out schedule. New jobs that are added
to the queue get the 'waiting' status.
As soon as the last film of a job is ejected in the output tray, the next job that
has been calculated will be put in printing status.
Example of the print queue screen:
Modaname 10:21:34 PR
film 1 of 6
Modaname 10:21:34 CA
xx Jobs in memory WA
The first line shows information on the job that is currently being printed:
•
the modality name, the time of receipt of the job and the job status (refer to
the table below).
The second line shows how many films are to be printed for the current job
•
and also which film from that total is currently being printed.
The progress indicator keeps the user informed of the progress of a
•
process (e.g., calculation of a bitmap, printing of a film). The line is
gradually filled from left to right, from 0% to 100% as the process
proceeds.
The last line (reachable by using the down arrow key) displays the number
•
(xx) of print jobs that are in the Waiting (WA) status. These jobs have been
loaded into the print queue and they are waiting to be printed.
2831A EN 20041201
62%
D 5302 U
RYSTAR SER MANUAL
Basic operation (Operator mode)
35