Gathering The Data; Connecting The Device - Ozone Solutions PortaSens II C16 User Manual

PortaSens II

Gathering the Data:

Once the data logging is completed, the data can now be retrieved from the monitor for
viewing. The following information will provide the information to retrieve the data from the C16
monitor.

Connecting the Device:

Connecting the device to the computer uses both the RS232-to-USB cable and the supplied
RS232 cable (unless the computer has a RS232 port, then only the RS232 cable will be used). To
start the round end of the RS232 cable will be connected to the C16 monitor to the RS232
Communication Port as shown in Figure 2 below.
Once the RS232 cable is connected to the monitor, it can now be connected to the
computer using the RS232-to-USB cable (or the RS232 port if the computer is equipped with one).
The RS232 connection will be connected to the RS232 port and then the USB plug will be plugged
into an open USB port on the computer.
Data Logging Guide, Model C16
Figure 2
6