Kenwood KOS-V1000 Service Manual page 17

COLOR : 60
When COLOR register is set to 60
COLOR : 50
When COLOR register is decreased
● RGB Automatic adjustment
• Conditions
Video source : NTSC composite video signal (AV-INI)
Input video : White 100%
Operation mode : Test Mode
• Adjustment
Start the automatic adjustment by touching AUTO Adjust
and RGB in this sequence (AUTO Adjust → RGB) on the
test mode screen.
KOS-V1000/V500
ADJUSTMENT
• Measurement equipment and etc.
Video signal generator
KOS-L702 monitor
Horizontal position default value for both of internal and
external monitors (Reference only)
Graphic
VIDEO (NTSC)
NAVI
VIDEO (PAL)
OSD default value
ALL 0
● TINT/PHASE Automatic adjustment (PAL)
• Conditions
Video source
Input video
Operation mode : Test Mode
• Adjustment
Start the automatic adjustment by touching AUTO Adjust
and TINT/PHASE in this sequence (AUTO Adjust →
TINT/PHASE) on the test mode screen.
* Make this adjustment after setting up Chroma auto
CONT-VIDEO.
(* Make the adjustment after the TINT and PHASE
adjustments of NTSC.)
• Measurement equipment and etc.
Video signal generator
KOS-L702 monitor
2
3
2
5
: PAL composite video signal (AV-INI)
: Magenta (Luster)
17