Connecting Via A Wireless Access Point; ([Via Network]) - Panasonic lumix DC-TZ90 Operating Instructions Manual

Connecting via a wireless access point ([Via Network])
Select a connection method to the wireless access point.
• WPS refers to a function that allows you to easily configure
the settings related to the connection and security of
wireless LAN devices. To check if the wireless access
point you are using is compatible with WPS, refer to the
instruction manual of the wireless access point.
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
If you are not sure about the WPS compatibility
(connecting by [From List])
Search for available wireless access points.
• Confirm encryption key of the selected wireless access point if the network
authentication is encrypted.
• When connecting by [Manual Input], confirm SSID, network authentication type,
encryption type, encryption key of the wireless access point you are using.
256
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
1
Press the wireless access point WPS button until it
switches to WPS Mode
• Refer to the wireless access point instruction manual for details.
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
On the camera screen, select the wireless access point
you are connecting to
2
Enter the PIN code displayed on the camera screen
into the wireless access point
3
Press [MENU/SET] on the camera
• Refer to the wireless access point instruction manual for details.
Select this option when you are not sure about the WPS compatibility,
or when you want to search for and connect to a wireless access
point.
Wi-Fi
About connections
DVQP1304