Economy] - Panasonic lumix DC-TZ90 Operating Instructions Manual

[Economy]

■
[Auto Power Off]
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
• When you want to use the camera again, turn the camera back on.
■
[Auto Power Off(Wi-Fi)]
The camera is automatically turned off if the camera has not been used for approx.
15 minutes with no Wi-Fi connection.
• When you want to use the camera again, turn the camera back on.
■
[Auto LVF/Monitor Off]
The monitor/viewfinder is automatically turned off if the camera has not been used for the
time selected on the setting.
• To turn the monitor/viewfinder on again, press any button or touch the monitor.
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
●
When using the AC adaptor (optional) and DC coupler (optional), [Auto Power Off] or [Auto Power
Off(Wi-Fi)] is disabled. Also, [Auto LVF/Monitor Off] is fixed to [5 MIN.].
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
[Select on connection]
[PictBridge(PTP)]
[PC]
200
] ([4K Pre-Burst]) of the 4K Photo function
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
Select when connecting to a PictBridge-compatible printer.
Select when connecting to a computer.
Using Menu Functions
Menu list
→ [Setup]
DVQP1304