Sending Pictures To Av Device - Panasonic lumix DC-TZ90 Operating Instructions Manual

Sending pictures to AV device

Still pictures and motion pictures can be sent to AV devices in the home (home AV
devices), such as DLNA compatible recorders.
Preparations
When sending a picture to AV devices, set your device to DLNA waiting mode.
• Read the operating instructions of your device for details.
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [AV device]
1
Select [Via Network] or [Direct] to connect
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button.
[Send Images While Recording]
4
Take a still picture
[Send Images Stored in the Camera]
4
Select the picture
●
Sending may fail depending on the operational status of the AV device. Also, sending may take a
while.
244
Wireless access point
(→239)
(→240)
Home AV device
(→256, 258)
(→241)
Wi-Fi
DVQP1304