Related Manuals for Black Box IC199A-R3
Summary of Contents for Black Box IC199A-R3
- Page 1 IC199A-R3 USB to RS-232 Converter User Manual Order toll-free in the U.S. or for FREE 24/7 Technical Support: Call 877-877-BBOX Contact (outside U.S. call 724-746-5500) Information www.blackbox.com • info@blackbox.com...
- Page 2 Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
-
Page 3: Safety Instructions
Disclaimer: Black Box Network Services shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Network Services may revise this document at any time without notice. - Page 4 NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3.
-
Page 5: Table Of Contents
Table of Contents Table of Contents 1. Specifications ..................................6 2. Overview ....................................7 2.1 Introduction ...................................7 2.2 Features ..................................7 2.3 What’s Included ................................8 2.4 System Requirements ..............................8 3. Installation .....................................9 3.1 Windows ..................................9 3.2 Verify the Driver Installation on Windows ........................9 3.3 Mac OS X ..................................9 3.4 Connecting a Serial Device ............................ -
Page 6: Specifications
Chapter 1: Specifications 1. Specifications Data Transfer Rate 500 kbps Function USB 1.1 Serial Converter operates as a bridge between one USB port and standard RS-232 serial port Connectors (1) USB 1.1 Type A, (1) DB9 RS-232 serial Power Bus-powered Operating System Supports Windows, Mac 8.6 and higher, and Linux operating systems. -
Page 7: Overview
2.1 Introduction The USB to RS-232 Converter (IC199A-R3) operates as a bridge between one USB port and a standard RS-232 serial port. Connect the cable to a PC or hub’s USB port, then link the other end of the cable to an RS-232 device, such as a PDA, scanner, printer, etc. -
Page 8: What's Included
Chapter 2: Overview 2.3 What’s Included Your package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 877-877-2269 or info@blackbox.com • USB to RS-232 Converter • (1) driver CD 2.4 System Requirements •... -
Page 9: Installation
• Mac OS 10.4 and above for Intel based Mac To install the drivers, follow the steps listed below: 1. Contact Black Box Technical Support to download the correct driver. 2. Double-click the dmg file on the desktop to extract the file. Then double-click the file that is extracted. -
Page 10: Connecting A Serial Device
Now you can connect your RS-232 device to the converter. If prompted to install the driver for your serial device, follow the manual that comes with your serial device to complete the installation. Scanner USB to Serial Converter Notebook Printer (IC199A-R3) Figure 3-14. Installation diagram. 877-877-2269 | blackbox.com Page 10... - Page 11 NOTES 877-877-2269 | blackbox.com Page 11...
- Page 12 About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less.