Press To Rapidly Advance The Tape, Or View The Picture - Hitachi DVPF2E Service Manual

16. g(F.FWD) Button (VCR)

Press to rapidly advance the tape, or view the picture

rapidly in forward during playback. (Forward
Search). When setting programme (For example:set-
ting clock or timer programme), press to determine
your selection and proceed to the next step you want
to input. Press to determine the setting modes from
the on screen menu.
17. B(PLAY) Button (VCR)
Press to begin playback. Press to enter digits when
setting programme (For example: setting clock or
timer programme). Press to select the setting modes
from the on screen menu.
18. h(REW) Button (VCR)
Press to rewind the tape, or to view the picture rapid-
ly in reverse during the playback mode (Rewind
Search). Press to cancel a setting of timer pro-
gramme. Press to correct digits when setting pro-
gramme (For example: setting clock or timer pro-
gramme).
19. C/A(STOP/EJECT) Button (VCR)
●EJECT Button
Press to remove the tape from the DVD/VCR.
●
STOP Button
Press to stop the tape motion. Press to enter digits
when setting programme (For example:setting
clock or timer programme). Press to select the set-
ting modes from the on screen menu.
20. OUTPUT Button
Press to select DVD mode or VCR mode.
●
You can switch the output mode of the DVD/VCR
either by pressing the OUTPUT Button on the
front panel, or by pressing the DVD or VCR
Button on the remote control. However, pressing
only the OUTPUT Button on the front panel
does not switch the output mode of the remote
control. If you want to use the remote control,
you always need to select the correct output
mode on the remote control, too.
21. g/G(SKIP) Button (DVD)
Plays back from the beginning of the next chapter or
track. Hold down to fast forward playback.
22. B(PLAY) Button (DVD)
Starts playback of the disc contents.
23. j/h(SKIP) Button (DVD)
Plays back from the beginning of the current chapter
or track. Hold down to fast reverse playback.
24. C(STOP) Button (DVD)
Stops operation of the disc.
25. OPEN/CLOSE Button
Press to insert discs into or remove them from the tray.
26. Display, Remote Sensor Window
(Standby/Power ON) Button
27.
Press to turn the power on and off.
28. A-B REPEAT Button
Repeats playback of a selected section.
29. REPEAT Button
Repeats playback of the current disc, title, chapter or
track.
30. MODE Button
Activates programme playback or random playback
mode when playing CDs or MP3. Sets Black level or
SRS TruSurround.
31. ZOOM Button
Enlarges part of a DVD-reproduced image.
32. CLEAR/C.RESET Button
●
DVD mode
Press to reset the setting.
●
VCR mode
Press to reset the counter.
33. ANGLE Button
Press to change the camera angle to see the sequence
being played back from a different angle.
34. MENU Button
●
DVD mode
Press to display the menu of the Disc.
●
VCR mode
Press to access the VCR menu.
35. ENTER Button
Press to accept a setting.
36. Arrow Buttons (L/K/
Use when making settings while watching the
display on a TV screen.
37. RETURN Button
Returns to the previous operation.
38. SURROUND Button
enjoy stereophonic sound system when
Press to
you playback Dolby Digital and PCM 48kHz
sound.
39. DVD Button
Press to select DVD mode for the remote control.
●
You can switch the output mode of the DVD/VCR
either by pressing the OUTPUT Button on the
front panel, or by pressing the DVD or the VCR
Button on the remote control. However, pressing
only the OUTPUT Button on the front panel
does not switch the output mode of the remote
control. If you want to use the remote control,
you always need to select the correct output
mode on the remote control, too.
40. SLOW Button (VCR)
During tape playback, press to view the video tape in
slow motion. Press the B Button to resume normal
playback. This Button does not affect DVD playback.
41. SKIP Buttons (j/G) (DVD)
Press to skip Chapters or Tracks.
INDEX SEARCH Button (j) (VCR)
Press to perform Index Search.
TIME SEARCH Button (G) (VCR)
Press to perform Time Search.
42. C(MENU SELECT/STOP) Button
●
DVD mode
Stops operation of the disc.
●
VCR mode
Press to stop the tape motion. Press to enter digits
when setting programme (For example: setting
clock or timer programme). Press to select the set-
ting modes from the on screen menu.
43. h (REV/REW) Button
●
DVD mode
Press to view the DVD picture in fast reverse
motion or to reverse playback of an Audio CD.
●
VCR mode
Press to rewind the tape, or to view the picture rapid-
ly in reverse during the playback mode (Rewind
Search). Press to cancel a setting of timer pro-
gramme. Press to correct digits when setting pro
/ )
s B
-
E1-6-7