EXCELL PRECISION CO., LTD.
⇒ Check Weighing Configurations
3-1
♦ If hold mode is set, accessing to
Use
or
Press
key
.
Preset "LO value"
(LO value > 10d)
Press
and
key to set " LO value"
E.g. LO value = 2 kg
.
Press
key
.
Preset "HI value"
(HI value ≥ LO value)
Press
and
key to set "HI value"
E.g. LO value = 2.5 kg
.
Press
key
Preset "Beeper value"
Press
and
key to set "HI value"
E.g. Beeper value = 22
Press
key
02018058
is denied.
key to select F4 function ⇒ the display shows
Press
kg
to clear HI, OK, LO values
kg
kg
A ⇒ 0 = After stable, the beeper beeps and the
kg
kg
B ⇒
kg
♦ LCD indication description:
14
key for 5 times
Press
key = Increase the flash value by one (from 0 to 9)
key = Confirm key
Χ
Χ
A
B
indications are on
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = whether stable or not, the beeper beeps
and the indications are on.
3 = open warning device: when the weight is
higher than HI value and the weight is
stable, LCD is on and Relay Card open.
0 = No beep
1 = OK (when the weight is between Low limit
& High limit.), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.
⏐
⏐
10d Low limit value High limit value
kg
.
key
⏐
ZSME300000317