Totalizing - Excell ZSME300000317 User Manual

EXCELL PRECISION CO., LTD.
LCD indication:
To exit preset mode, please press
◆
2. Recall Check-weighing Values
Press
Then press
Then press
Then press
3. Clearing Check-weighing Values
Press key then press
value"
Then press
Press key then press

2-2-3 Totalizing

1. Weight Totalizing
Place goods on the platter, after stable and press
Then the display shows the total number of additions and the totalized weight value.
And the (M+) indication " " will flash on the display. The indicator will recover to show
the weight value of the goods on the platter after 3 seconds and the (M+) indication
" " is on.
The indicator allows the next totalizing operation, even when the weight value does
not return back to zero. The
by more than 10d. The indicator will save the totalized weight value after the weight is
stable.
The indicator can totalize positive or negative weight but can't do both at the same
time. The totalized weight store must be reset to zero before it is possible to select
positive or negative totalizing mode.
The totalizing function can be used up to a maximum of 9999 times before it must be
reset. The totalizing display is limited to 6 digits maximum.
When totalizing, RS-232 will also output. ( Refer to F5 setting)
2. Clear Totalized Weight Values
♦ Press
02018058
⏐ ⏐
10d Low Limit
key then press
⇒ Recall "High limit value"
key again
⇒ Recall "Beeper value"
key again
⇒ Back to the beginning
key again
key, and then press
key again ⇒ Clear "High limit value" and "Beeper value"
key is functional, when the weight value changes
then key to clear all totalized weight values.
⏐
High Limit
key.
key ⇒ Recall "Low limit value"
key 6 times continuously ⇒ Clear all values.
10
key ⇒ Recall "Low limit
key to save the weight value.
ZSME300000317