Adjustment Procedure - Panasonic AG-AC7P Service Manual

1. Electrical Adjustment
● Adjustment method is different from a conventional High definition video camera.
● An exclusive jig and PC (including EVR adjustment software) are necessary for electrical adjustment.
● A USB driver for service is necessary to communication with PC.

1-1. Adjustment Procedure

Connect the main unit to PC with USB.
Please follow the instruction "How to use PC EVR software for AG-AC7P" about adjustment procedure and set
up condition. The instruction can be confirmed by select tab "Help(H) → Usage(M)" on main window of EVR
Adjustment software.
NOTE: The instruction file "Usage_E.pdf" is included in folder "Help(H) → Usage(M)" under the folder
"VVS0092".
If necessary, open the file "Usage_E.pdf" to confirm the communication, installation and adjustment
procedure before boot up the EVR Adjustment software.
< Part Number of jig >
NOTE: Only a necessary jig mentions for the setup of electrical adjustment in the table below.
Please confirm the content that has been described to "How to use PC EVR software for AG-AC7P" in
detail.
No.
1 PC
2 AC Adaptor
3 DC cable
4 USB Cable
5 PC EVR Software for AG-AC7P
6 USB Driver for Adjustment
< Figure of connection >
< Adjustment Items >
Adjustment items as follows.
Please follow the instruction "How to use PC EVR software for AG-AC7P" about adjustment procedure and set
up condition. The instruction can be confirmed by select tab "Help(H) → Usage(M)" on main window of EVR
Adjustment software.
Name Part Number
------
------
------
------
VVS0092 Download from Global Service WEB Site
VVS0058 Download from Global Service WEB Site
ELE-1
Remarks