Advertisement
Safety instructions
•
Caution - The outer foil is very thin and can be damaged
if not used correctly. Check that the foil is not damaged
before using the shaver.
Do not use the shaver if the foil etc. is damaged as you
will cut your skin.
•
Be sure to turn the shaver off before maintenance.
-
Failure to do so may result in an accident or injury.
Do not alter the appliance. Also, do not disassemble or repair it.
•
-
It could result in injury. Contact the shop where you purchased
the appliance or your nearest service center for repairs.
•
Before use, always make sure that the foil has not become
damaged or misshapen.
-
Failure to do so may cause damage to skin.
•
Do not apply excessive pressure to the foil.
-
It could break the foil, resulting in scratching of the skin.
•
Do not use the appliance for any purpose other than shaving.
-
It could break or deform the foil, resulting in scratching
of the skin.
•
Do not short-circuit, disassemble, or discard the battery
in a fire.
-
It could result in burns or injury.
•
For users' safety
This appliance should not used by those who disabled in
body,sense or have metal illness.
This appliance should not used by those who lack of
experience and knowledge(inclduding children).
EXcept they use this appliance under others supervision.
Keep close supervision on children to prevent them take
it as a toy.
-
It could cause injury.
Maintain the operating instruction
Put the packing bag out of baby , s reach.
-
It could result in an accident.
WARNING - Keep the
appliance
dry.
6
Stop cleaning
under the water
faucet as the war
-ning of left picture
SPECIFICATIONS
Product Name:Shaver
Model:ES-RC20
Rated Voltage:d.c 3V
Rated current: 0.6A
Batteries:Two AAA LR03 alkaline dry-cell batteries
(Sold separately)
Made in China
Production Date: Consult the date printed on product
The unit is applied to Q/SXDGWB 6
Panasonic Electric works Wanbao (Guangzhou)co.,Ltd.
Wanbao Base,Shiguang Road,Panyu District,Guangzhou
Post code:511495
Tel:(020)84770333 (Switchboard)
You are not informed,If the specification above is changed.
Parts idenfification
Protective cap
Outer foil
Outer foil release buttons
Inner blade
0/1 switch
Battery cover release button
Battery push location
Battery cover
Cleaning brush
Soft case
Replacing batteries
1
1
Slide the 0/1 switch to the
position where "0" is visible.
2
2
Remove the battery cover while
pressing the battery cover release
button.
7
2008/12/09
16:20:14
Advertisement
